UPD64 datasheet(13/68 Pages) NEC

No. de pieza	UPD64

Descripción Electrónicos	4-BIT SINGLE-CHIP MICROCONTROLLER FOR INFRARED REMOTE CONTROL TRANSMISSION

PDF	68 Pages

Scroll/Zoom	100%

Fabricante Electrónico	NEC [NEC]

Página de inicio	http://www.nec.com/

Logo

13 / 68 page

µPD63, 63A, 64

2.9.2 Carry flag (CY)

The carry flag is set (to 1) in the following cases:

• If the ANL instruction or the XRL instruction is executed when bit 3 of the accumulator is “1” and bit 3 of the

operand is “1”.

• If the RL instruction or the RLZ instruction is executed when bit 3 of the accumulator is “1”.

• If the INC instruction or the SCAF instruction is executed when the value of the accumulator is 0FH.

The carry flag is cleared (to 0) in the following cases:

• If the ANL instruction or the XRL instruction is executed when at least either bit 3 of the accumulator or bit

3 of the operand is “0”.

• If the RL instruction or the RLZ instruction is executed when bit 3 of the accumulator is “0”.

• If the INC instruction or the SCAF instruction is executed when the value of the accumulator is other than 0FH.

• If the ORL instruction is executed.

• When Data is written to the accumulator by the MOV instruction or the IN instruction.

UPD64 Datasheet(PDF) 13 Page - NEC