Using the PMB board separately

UM1806

8/16

DocID026737 Rev 1

6

Using the PMB board separately

The PMB board can be used separately for your own application. It can be used to supply a

real IoT (Internet of Things) application case with a micro-controller and radio circuit.

For this it will be necessary to jump strap the I1 to I1’ pins and I2 to I2’ pins as shown below

in Figure 9.

Figure 9. EFL700pmb connections to perform when PMB is used separately

The PMB board characteristics are the following at 25°C:

•

4.2 V output regulated voltage

•

Deep discharge protection when output voltage gets down to 3.2 V

•

USB fast recharge