2 of 8

RF3377

Rev A6 DS050524

7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical

support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.

Absolute Maximum Ratings

Parameter

Rating

Unit

Input RF Power

+13

dBm

Operating Ambient Temperature

-40 to +85

°C

Storage Temperature

-60 to +150

°C

60

mA

Parameter

Specification

Unit

Condition

Min.

Typ.

Max.

Overall

Frequency Range

DC to >6000

MHz

3dB Bandwidth

4.4

GHz

Gain

15.5

16.7

dB

Freq=500MHz

15.0

16.5

dB

Freq=1000MHz

14.5

15.5

dB

Freq=2000MHz

14.5

dB

Freq=3000MHz

14.0

Freq=4000MHz

13.0

Freq=6000MHz

Noise Figure

3.0

dB

Freq=2000MHz

Input VSWR

<2:1

In a 50

Ω system, DC to 5000MHz

Output VSWR

<1.8:1

In a 50

Ω system, DC to 6000MHz

Output IP3

24.5

25.5

dBm

Freq=1000MHz

+24.5

+25.5

dBm

Freq=2000MHz

Output P1dB

+12.0

+13.5

dBm

Freq=1000MHz

+11.5

+13.0

dBm

Freq=2000MHz

Reverse Isolation

19

dB

Freq=2000MHz

Thermal

122

°C/W

Maximum Measured Junction

Temperature at DC Bias Condi-

tions

102

°C

Mean Time To Failures

77,000

years

Power Supply

With 22

Ω bias resistor

Device Operating Voltage

3.65

3.7

V

4.5

4.8

V

Operating Current

40

60

mA

See Note 2.

Note 1: All specification and characterization data has been gathered on standard FR-4 evaluation boards. These evaluation boards are not

optimized for frequencies above 2.5GHz. Performance above 2.5GHz may improve if a high performance PCB is used.

Note 2: The RF3377 must be operated at or below 60mA in order to achieve the thermal performance stated above. Operating at 40mA will

ensure the best possible combination of reliability and electrical performance.

Note 3: Because of process variations from part to part, the current resulting from a fixed bias voltage will vary. As a result, caution should be

used in designing fixed voltage bias circuits to ensure the worst case bias current does not exceed 60mA over all intended operating condi-

tions.

Caution! ESD sensitive device.

Exceeding any one or a combination of the Absolute Maximum Rating conditions may

cause permanent damage to the device. Extended application of Absolute Maximum

Rating conditions to the device may reduce device reliability. Specified typical perfor-

mance or functional operation of the device under Absolute Maximum Rating condi-

tions is not implied.

RoHS status based on EUDirective2002/95/EC (at time of this document revision).

The information in this publication is believed to be accurate and reliable. However, no

responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any

infringement of patents, or other rights of third parties, resulting from its use. No

license is granted by implication or otherwise under any patent or patent rights of

RFMD. RFMD reserves the right to change component circuitry, recommended appli-

cation circuitry and specifications at any time without prior notice.