948

949

Optional: Control unit for pneumatic presses

Pneumatic press

Pistol tool

for discrete wires and jumper wires

AP-2

AP-2D

MP-CU

AP-2H

ID applicator

for 1.27mm(.050") pitch ribbon cables

ID applicator

for discrete wires and jumper wires

ID applicator

for 1.27mm(.050") pitch ribbon cables

Pneumatic press

Pneumatic press

Specifications

• Dimensions: (W x L x H)141 x 252 x 301mm

(5.6" x 9.9" x 11.9")

• Weight: Approx. 16kg(35lb)

• Air pressure: 490 to 690 kPa (5 to 7 kgf/sq.cm)

• Strokes: 50 max./minute

• Pressure output: Approx. 3.8kN (390 kgf)

when air pressure is 490 kPa (5 kgf/sq.cm)

• Operation method: Air-operated foot valve

• Dies: Applicator replacement

Note: For the HR connectors, please use AP-2H

press that provides bigger pressure output.

The filter regulator & pressure switch help to make reliable operation even

under the air condition is not stable. Light and compact.

Specifications

• Dimensions: (W x L x H)200 x 300 x 230mm(7.9" x 11.8" x 9.1")

• Weight: Approx. 5kg(11 lb)

• Power source: 100/115/220/240V AC, single-phase, 50/60 Hz

• Air pressure: 490 to 686 kPa (5 to 7 kgf/sq.cm)

• Accessories: Foot switch, power cord

Versatile press applicable

to various ID applicators.

Specifications

• Dimensions: (W x L x H)

184 x 302 x 491mm

(7.2" x 11.9" x 19.3")

• Weight: Approx. 30kg(66 lb)

• Air pressure : 490 to 690 kPa (5 to 7 kgf/sq.cm)

• Strokes: 50 max./minute

• Pressure output: Approx. 7.5kN (Approx. 760 kgf)when

air pressure is 490 kPa (5 kgf/sq.cm)

• Operation method: Air-operated foot valve

• Dies: Applicator replacement

IDB-12

<Made in

Germany>

Specifications

• Dimensions: (W x L x H)23 x 135 x 175mm

(.9" x 5.3" x 6.9")

• Weight: 270g(1lb)

• Dies: Head adaptor (IDH series)

replacement

• Compact, light and maintenance free. No

inspection or lubrication is necessary.

Specifications

• Dimensions: (W x L x H)141 x 252 x 301mm

(5.6" x 9.9" x 11.9")

• Weight: Approx. 16kg(35lb)

• Air pressure: 490 to 686 kPa (5 to 7 kgf/sq.cm)

• Strokes: 50 max./minute

• Applicable connectors: JST's RA, RC & RX connectors

• Pressure output: Approx. 3.8kN (Approx. 390 kgf)

when air pressure is 490 kPa (5 kgf/sq.cm)

• Operation method: Air-operated foot valve

• Dies: Applicator replacement

The arrow mark indocates the press that is applicable to the applicator.

ID tools and machines

ID tools and machines

5-B

MKD-LP

H2 series

ID applicator

for discrete wires

ID applicator

for discrete wires and jumper wires

Pneumatic press

Pneumatic press

Hand press

Auto. ID machines for discrete wires

BCD-M5BP

Auto. ID machines for shielded wires

SCD-M15B

Auto. ID machines for multi-harnesses

CAM-M12B

Note: MKD-LP applicators are not applicable

to the connectors with glass-filled nylon

housings i.e. 12 to 15-circuit DD/DS

connectors and 13 to 16-circuit KR

connectors.

Specifications

• Dimensions: (WXLXH)95X515X203mm

(3.7"X20.3"X8.0")

• Weight: Approx. 6.5kg(14lb)

• Applicable press: AP-K2N

• Applicable connectors: JST'S connectors

for discrete wires.

Auto. ID machines for 2.5 mm (.098")

& 2.0 mm (.079") pitch jumper wires

RCD-M9BE

Simple and compact pneumatic press without

electrically controlled unit.

Specifications

• Dimensions: (WXLXH)180X150X250mm

(7.1"X5.9"X9.8")

• Weight: Approx. 10kg(22lb)

• Air pressure: 490 to 690kPa (5 to 7kgf/sq.cm)

• Dies: Dies-Main body integrated

• Strokes: 50 max./minute

Specifications

• Dimensions: (W x L x H)130 x 280 x 383mm

(5.1" x 11.0" x 15.1")

• Weight: Approx. 7kg(15 lb)

Note: The difference between the HPD-M2A and

the HPD-M2A-HID is the main shaft.

HPD-M2A is for the H2A series applicators

HPD-M2A-HID is for the HID series

applicators

HPD-M2A

HPD-M2A-HID

MKD-LP+AP-K2N

MP-2A

H2A series

FP series

HID series

Pneumatic press for

1.27mm(.050") ribbon cable

connectors. Operation is

easy and safe as the

connector and cable can be

set while the sliding

applicator is drawn out of

the terminating section.

Versatile press applicable to

various ID applicators.