KMPC8315CVRAGDA datasheet(13/106 Pages) FREESCALE

No. de pieza	KMPC8315CVRAGDA

Descripción Electrónicos	PowerQUICC II Pro Processor Hardware Specifications

PDF	106 Pages

Scroll/Zoom	100%

Fabricante Electrónico	FREESCALE [Freescale Semiconductor, Inc]

Página de inicio	http://www.freescale.com

Logo

13 / 106 page

MPC8315E PowerQUICC II Pro Processor Hardware Specifications, Rev. 2

Freescale Semiconductor

Electrical Characteristics

CAUTION

When the device is in D3 warm (standby) mode, all external voltage

supplies applied to any I/O pins, with the exception of wake-up pins, must

be turned off. Applying supplied external voltage to any I/O pins, except the

wake up pins, while the device is in D3 warm standby mode may cause

permanent damage to the device.

An example of the power-up sequence is shown in Figure 4 when implemented along with low power D3

warm mode.

Figure 4. Power Up Sequencing Example with Low power D3 Warm Mode

The switchable and continuous supplies can be combined when the D3 warm mode is not used.

The SATA power supplies VDD33PLL and VDD33ANA should go high after NVDD3_OFF supply and

go low before NVDD3_OFF supply. The NVDD3_OFF voltage levels should not drop below the

VDD33PLL, VDD33ANA voltages at any time.

Continuous I/O Voltage

Continuous Core Voltage

90%

PORESET

tSYS_CLK_IN / tPCI_SYNC_IN >= 32 clock

Switchable Core Voltage

Switchable I/O Voltage

(LVDDx_ON, NVDDx_ON)

(GVDD, LVDDx_OFF, NVDDx_OFF)

VDDC

(VDD)

KMPC8315CVRAGDA Datasheet(PDF) 13 Page - Freescale Semiconductor, Inc