CubeSuite+ Simulator for V850E2 supporting OS Timer V3.02.00

Release Note

R20UT2916EJ0100

Rev.1.00

Page 6 of 9

February 17, 2014

4.1.6 Instructions

The instructions (SYNCE/SYNCM/SYNCP) are not supported. If these were executed, the operation is same

as NOP execution.

4.1.7 Data flash

It is impossible to use data flash area. If CPU accesses this area, CPU breaks and error is happen.

4.1.8 Option byte storage register

The value of Option byte storage register "OPBT0" is always "0".

4.1.9 EH_RESET register function

EH_RESET register functions are not supported. In the case of a CPU reset, the reset address will always

be "0x0".

4.1.10 CPU clock frequency

The CPU clock frequency is the value which is specified with the [Main clock frequency] property.

4.1.11 Execution clock

The number of execution clocks of each instruction will be the number of execution clocks when another

instruction is executed immediately after that instruction is executed.