www.austriamicrosystems.com/LDOs/AS1360

Revision 1.07

7 - 13

AS1360

Datasheet - D e t a i l e d D e s c r i p t i o n

8 Detailed Description

The AS1360 is a low-power, positive voltage regulator designed in such a way that the supply current is independent from the load current. The

device regulates the output by comparing the output voltage to an internally generated reference voltage.

The device is available in fixed output voltages of 1.8, 2.5, 3.0, 3.3, and 5.0V. Fixed output voltages are generated using the internal resistor

divider network (see Figure 1 on page 1).

Short Circuit/Overcurrent Protection

The AS1360 monitors current flow through the p-channel MOSFET. In short-circuit or overcurrent conditions, the integrated short-circuit protec-

tion circuitry will limit output current.

Note:

Thermal Dissipation according to Absolute Maximum Ratings on page 3 must be considered.