| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
AM79C971VCW Datasheet(PDF) 250 Page - Advanced Micro Devices |
|
|
|||||||||||||||||||||||||||||
AM79C971VCW Datasheet(HTML) 250 Page - Advanced Micro Devices |
|
250 / 265 page ![]() E-4 Am79C971 Register 4: Auto Negotiation Advertisement Ability Register Bit Name Description 15 NP NA (0) Next Page. Defaults 0 to ZERO after power- up and after hardware resets (H_RESET). This bit indicates the ability of the PHY to send and receive message pages after the initial base code word has been sent. The Am79C971 controller does not support Next Pages currently. 14 RES 0 Read as ZERO always. 13 RF 0 Remote Fault. Defaults to ZERO after power-up and after hardware resets (H_RESET). This bit indicates that we have detected a remote fault with the other node. 12-5 TAF 03 Technology Ability Field. The Am79C971 controller will only support 10BaseT or 10BaseT full duplex with the internal PHY device. When using the internal PHY the TAF will be set to 00000011b always. 4-0 SF 01 Selector Field. The Am79C971 controller will only currently support IEEE 802.3 messages. When using the internal PHY the SF will be set to 00001b always. Register 5: Auto Negotiation Link-Partner Ability Register Bit Name Description These fields are identical to the previous and are valid for the node in which we are currently engaged. 15 NP 0 Next Page. Defaults to ZERO after power- up and after hardware resets (H_RESET). 14 ACK 0 Acknowledge. Defaults to ZERO after power-up and after hardware resets (H_RESET). 13 RF 0 Remote Fault. Defaults to ZERO after power-up and after hardware resets (H_RESET) 12-5 TAF 03 Technology Ability Field. Defaults to all ZEROs after power- up and after hardware resets (H_RESET) 4-0 SF 01 Selector Field. Defaults to all ZEROs after power-up and after hardware resets (H_RESET) Register 6: Auto Negotiation Expansion Register Bit Name Description This is the catch all register of odds and ends that did not fit in other registers. 15-5 RES 0 Reserved. Read and written as ZERO’s. 4 PDF 0 Parallel Detection Fault. Defaults to ZERO after power-up and after hardware resets (H_RESET). This bit indicates that more than one PHY has responded to a valid link or none have responded to a valid link. Either way |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |