EMC1413 datasheet(10/52 Pages) SMSC

10 / 52 page

Multiple Channel 1°C Temperature Sensors with Beta Compensation

Datasheet

Revision 1.41 (02-23-12)

SMSC EMC1413 / EMC1414

DATASHEET

Chapter 4 Electrical Specifications

4.1

Absolute Maximum Ratings

Note: Stresses at or above those listed could cause permanent damage to the device. This is a stress

rating only and functional operation of the device at any other condition above those indicated

in the operation sections of this specification is not implied.

Note 4.1

For the 5V tolerant pins that have a pull-up resistor (SMCLK, SMDATA, THERM, and

ALERT), the pull-up voltage must not exceed 3.6V when the device is unpowered.

Table 4.1 Absolute Maximum Ratings

DESCRIPTION

RATING

UNIT

Supply Voltage (VDD)

-0.3 to 4.0

Voltage on 5V tolerant pins (V5VT_pin)

-0.3 to 5.5

Voltage on 5V tolerant pins (|V5VT_pin - VDD|) (see Note 4.1)0 to 3.6

Voltage on any other pin to Ground

-0.3 to VDD +0.3

Operating Temperature Range

-40 to +125

°C

Storage Temperature Range

-55 to +150

°C

Lead Temperature Range

Refer to JEDEC Spec. J-STD-020

Package Thermal Characteristics for MSOP-10

Thermal Resistance (

j-a)

132.2

°C/W

Package Thermal Characteristics for DFN-10

Thermal Resistance (

j-a)77.1

°C/W

ESD Rating, All pins HBM

2000

EMC1413 Datasheet(PDF) 10 Page - SMSC Corporation

EMC1413 Datasheet(HTML) 10 Page - SMSC Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Datasheet Descarga

Enlace URL