E5CN-R2ML-500 datasheet(34/72 Pages) OMRON

34 / 72 page

E5CN-H

Specifications

Ratings

✽ For models with current outputs, control output 1 can be used as a transfer output.

Power supply voltage

No D in model number: 100 to 240 VAC, 50/60 Hz

D in model number: 24 VAC, 50/60 Hz; 24 VDC

Operating voltage range

85% to 110% of rated supply voltage

Power consumption

100 to 240 VAC: 8.5 VA (max.) (E5CN-HR2 at 100 VAC: 3.0 VA)

24 VAC/VDC: 5.5 VA (24 VAC)/3.5 W (24 VDC) (max.) (E5CN-HR2D at 24 VAC: 2.7 VA)

Sensor input

Any of the following can be selected (i.e., fully universal input).

Thermocouple: K, J, T, E, L, U, N, R, S, B, W, or PL II

Platinum resistance thermometer: Pt100 or JPt100

Current input: 4 to 20 mA or 0 to 20 mA

Voltage input: 1 to 5 V, 0 to 5 V, or 0 to 10 V

Input impedance

Current input: 150

Ω max., Voltage input: 1 MΩ min. (Use a 1:1 connection when connecting the ES2-HB.)

Control method

ON/OFF control or 2-PID control (with auto-tuning)

Control

output

Relay output

SPST-NO, 250 VAC, 3 A (resistive load), electrical life: 100,000 operations, minimum applicable load: 5 V, 10 mA

Voltage output

(for driving SSR)

Output voltage: 12 VDC

±15% (PNP), max. load current: 21 mA, with short-circuit protection circuit

Current output

4 to 20 mA DC/0 to 20 mA DC, load: 600

Ω max., resolution: approx. 10,000 ✽

Linear voltage out-

put

0 to 10 VDC (load: 1 k

Ω min.), Resolution: Approx. 10,000

Auxilia-

output

Number of outputs 2 max.

Output specifica-

tions

Relay output: SPST-NO, 250 VAC, 3 A (resistive load), electrical life: 100,000 operations, minimum applicable

load: 5 V, 10 mA

Event

input

Number of outputs 2

External contact

input specifica-

tions

Contact input: ON: 1 k

Ω max., OFF: 100 kΩ min.

Non-contact input: ON: Residual voltage: 1.5 V max., OFF: Leakage current: 0.1 mA max.

Current flow: Approx. 7 mA per contact

Logic

opera-

tions

Number of opera-

tions

8 max. (Combinations can be made using work bits.)

Operations

• Logic operation: Any of the following four patterns can be selected. The input status may be inverted.

(A and B) or (C and D), (A or C) and (B or D), A or B or C or D, A and B and C and D (A, B,

C, and D are four inputs.)

• Delay:

ON delay or OFF delay for the results of the logic operation given above.

Setting time: 0 to 9999 s or 0 to 9999 min

• Output inversion: Possible

Outputs

One work bit per operation

Work bit assign-

ments

Any of the following can be assigned to up to eight work bits (logic operation results): Event input operations,

auxiliary outputs, or control outputs.

Transfer

outputs

Number of outputs 1 max.

Output

specifications

Current output: 4 to 20 mA DC, Load: 600

Ω max., Resolution at 4 to 20 mA: Approx. 10,000

RSP input

Not supported

Setting method

Digital setting using front panel keys

Indication method

11-segment digital display and individual indicators (7-segments displays also possible)

Character height: PV: 11 mm, SV: 6.5 mm

Bank switching

Supported (number of banks: 8)

Local SP, alarm settings, PID sets (PID constants, MV upper limit, MV lower limit, etc.)

Other functions

Manual output, heating/cooling control, loop burnout alarm, SP ramp, other alarm functions, heater burnout

detection, 40% AT, 100% AT, MV limiter, input digital filter, self-tuning, temperature input shift, run/stop,

protection functions, control output ON/OFF counter, extraction of square root, MV change rate limit, PV/SV

status display, logic operations, automatic cooling coefficient adjustment

Ambient operating tempera-

ture

−10 to 55°C (with no condensation or icing), for 3-year warranty: −10 to 50°C

Ambient operating humidity

25% to 85%

Storage temperature

−25 to 65°C (with no condensation or icing)

E5CN-R2ML-500 Datasheet(PDF) 34 Page - Omron Electronics LLC

E5CN-R2ML-500 Datasheet(HTML) 34 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72

Datasheet Descarga

Enlace URL