TOP VIEW

SIDE VIEW

CC3000MOD

Module Size: 16.3 x 13.5 x 2.0 mm

16.30

16.30

2.00

13.50

SWRS126-007

PC

USB cable

USB to serial

bridge

1.8 V

CC3000

WL_RS232_TX

WL_RS232_RX

SWRS126-017

WL_EN2

CC3000MOD

SWRS126 – NOVEMBER 2012

www.ti.com

Test Mode Serial Interface

The CC3000 module contains a dedicated WLAN serial interface to connect to the CC3000 radio tests tool, an

external PC-based software test utility, during development and evaluation phase (see Figure 6 and Table 6).

The CC3000 radio test tool utility can be obtained from the CC3000 TI wiki (www.ti.com/connectivitywiki).

Figure 6. CC3000 Test Mode Serial Interface Connection

Table 6. CC3000 Test Mode Debug Interface Description

Signal Name

Function

WL_RS232_TX

WL_RS232_RX

(1)

WL_EN2 pins must be grounded while bringing up the CC3000 radio tool.

SURFACE MOUNT INFORMATION

The CC3000 module uses a flat shield cover designed for a fully automated assembly process. For baking and

reflow recommendations, follow MSL level 4 found in the JEDEC/IPC Standard J-STD-20b. The classification

MECHANICAL INFORMATION

Module Mechanical Outline

Figure 7 shows the mechanical outline for the CC3000 module.

Figure 7. CC3000 Module Mechanical Outline

10

Submit Documentation Feedback

Copyright © 2012, Texas Instruments Incorporated