– 11 –

ICX098AL

6. Dark signal shading

After measuring 5, measure the maximum (Vdmax [mV]) and minimum (Vdmin [mV]) values of the dark

signal output and substitute the values into the following formula.

∆Vdt = Vdmax – Vdmin [mV]

7. Lag

Adjust the signal output value generated by strobe light to 150mV. After setting the strobe light so that it

strobes with the following timing, measure the residual signal (Vlag). Substitute the value into the following

formula.

Lag = (Vlag/150)

× 100 [%]

Vlag (Lag)

Signal output 150mV

Light

VD

V2A

Strobe light

timing

Output