Software Operation

www.ti.com

Click on the Write Memory button so that the values are programmed into the EPROM.

A data file can also be saved by going to File|Save Data File. The data that is saved in the file is the data

displayed on the grids representing the EPROM memory map.

8.3.2

Status Bytes

This section allows the user to read or write the EPROM Status bytes of the bq2026. The registers are

programmed by clicking on the appropriate grid, entering the desired value, and pressing ENTER.

Note that the status registers are EPROM. Once a bit has been cleared, it cannot be set.

Figure 7. DATA Page

10

bq2026 Evaluation Software

SLUU763

– December 2011

Submit Documentation Feedback

Copyright

© 2011, Texas Instruments Incorporated