ADS1248EVM-PDK Kit Operation

www.ti.com

Switch the BSL switch (SW4) on the MMB3 to the BSL position (to the left) as instructed, then press

OK. The plug-in will download the firmware to the MMB3. This operation may take a couple of minutes,

so the progress is updated in the message at the top of the ADS1248 plug-in window (as Figure 13

shows). The firmware is saved in flash memory on the MMB3, so this operation should only need to be

performed once.

Figure 13. Firmware Download Progress Indicator

16

ADS1148EVM, ADS1248EVM, ADS1148EVM-PDK, and ADS1248EVM-PDK

SBAU142B

– April 2009 – Revised May 2011

Submit Documentation Feedback

Copyright

© 2009–2011, Texas Instruments Incorporated