H7GP

6

Dimensions

Note: All units are in millimeters unless otherwise indicated.

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Panel Cutouts

With Flush Mounting Bracket

Terminal cover (provided)

Panel

M3.5 terminal screw

H7GP-C

H7GP-T

Y92S-32 rubber

packing (provided)

Y92F-32 flush mounting

adaptor (provided)

Panel cutouts are as shown below

(according to DIN43700).

Note: 1. The mounting panel thickness should

be 1 to 6 mm.

2. Water resistance will be lost if

Counters are mounted side-by-side.

4. When horizontally mounting Counters

side-by-side, leave at least 50 mm

between any two Counters.

3. The terminal screws are M3.5.

(Theeffective thread length is 6 mm.)

0

0

0

0

5.0 min.

50 min.