LifecyclePhase:

Revision

: 2

Expired Period: Forever

Release Date:2009-01-21 08:15:09.0

Technical Data Sheet

7383/R2C3-AMQB/X

Everlight Electronics Co., Ltd.

http\\:www.everlight.com

Rev 2

Page: 10 of 10

Device Number :

DLE-0000741

Prepared date:01-13-2009

Prepared : Flourix Chen

6. Heat Management



Heat management of LEDs must be taken into consideration during the design stage of LED

application. The current should be de-rated appropriately by referring to the de-rating curve

found in each product specification.



The temperature surrounding the LED in the application should be controlled. Please refer to the

data sheet de-rating curve.

7. ESD (Electrostatic Discharge)



Electrostatic discharge (ESD) or surge current (EOS) can damage LEDs.



An ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling LEDs.



All devices, equipment and machinery must be properly grounded.



Use ion

blower to neutralize the static charge which might have built up on surface of the LEDs

8. Other



Above specification may be changed without notice. EVERLIGHT will reserve authority on

material change for above specification.



When using this product, please observe the absolute maximum ratings and the instructions for

using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any

damage resulting from use of the product which does not comply with the absolute maximum

ratings and the instructions included in these specification sheets.



These specification sheets include materials protected under copyright of EVERLIGHT

corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s

consent.

EVERLIGHT ELECTRONICS CO., LTD.

Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd,

Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C

http:\\www.everlight.com