STA015T datasheet(33/56 Pages) STMICROELECTRONICS

33 / 56 page

Obsolete

Product(s)

- Obsolete

Product(s)

33/56

STA015

PCMCROSS

Address: 0x56 (86)

Type: R/W

Software Reset: 0x00

Hardware Reset: 0x00

The default configuration for this register is ’0x00’.

MFSDF (X)

Address: 0x61 (97)

Type: R/W

Software Reset: 0x07

Hardware Reset: 0x07

The register contains the values for PLL X divider (see Fig. 7).

The value is changed by the internal STA015 Core, to set the clocks frequencies, according to the incom-

ing bitstream. This value can be even set by the user to select the PCM interface configuration.

The VCO output frequency is divided by (X+1). This register is a reference for 32KHz and 48KHz input

bitstream.

DAC_CLK_MODE (99)

Address: 0x63

Type: RW

Software Reset: 0x00

Hardware Reset: 0x00

This register is used to select the operating mode for OCLK clock signal. If it is set to “1”, the OCLK fre-

quency is fixed, and it is mantained to the value fixed by the user even if the sampling frequency of the

incoming bitstream changes. It the MODE flag is set to f0f, the OCLK frequency changes, and can be set

to (512, 384, 256) * Fs. The default configuration for this mode is 256 * Fs. When this mode is selected,

MSB

LSB

Description

XXXX

Left channel is mapped on the left output.

Right channel is mapped on the Right output

XXXX

Left channel is duplicated on both Output channels.

XXXX

Right channel is duplicated on both Output channels

XXXX

Right and Left channels are toggled

MSB

LSB

M3M2M1M0

MSB

LSB

XXXX

MODE

STA015T Datasheet(PDF) 33 Page - STMicroelectronics

STA015T Datasheet(HTML) 33 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

Datasheet Descarga

Enlace URL