MCP2200 datasheet(15/34 Pages) MICROCHIP

15 / 34 page

 2010 Microchip Technology Inc.

DS22228A-page 15

MCP2200

3.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings (†)

Ambient temperature under bias......................................................................................................... -40°C to +85°C

Storage temperature ........................................................................................................................ -65°C to +150°C

Voltage on VDD with respect to VSS, PIC18F ..................................................................................... -0.3V to +6.0V

Voltage on VDD with respect to VSS, PIC18LF ................................................................................... -0.3V to +4.0V

Voltage on MCLR with respect to Vss ................................................................................................. -0.3V to +9.0V

Voltage on VUSB pin with respect to VSS ............................................................................................ -0.3V to +4.0V

Voltage on D+ and D- pins with respect to VSS ...................................................................... -0.3V to (VUSB + 0.3V)

Voltage on all other pins with respect to VSS ........................................................................... -0.3V to (VDD + 0.3V)

Total power dissipation(1) ............................................................................................................................... 800 mW

Maximum current out of VSS pin ...................................................................................................................... 95 mA

Maximum current into VDD pin ......................................................................................................................... 95mA

Clamp current, IK (VPIN < 0 or VPIN > VDD)

20 mA

Maximum output current sunk by any I/O pin.................................................................................................... 25 mA

Maximum output current sourced by any I/O pin .............................................................................................. 25 mA

Maximum current sunk by all ports ................................................................................................................... 90 mA

Maximum current sourced by all ports ............................................................................................................. 90 mA

Note 1:

Power dissipation is calculated as follows: PDIS = VDD x {IDD –

 IOH} +  {(VDD – VOH) x IOH} + (VOl x IOL).

VUSB must always be

 VDD + 0.3V

† NOTICE:

Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operation listings of this specification is not implied. Exposure above maximum rating conditions for

extended periods may affect device reliability.

MCP2200 Datasheet(PDF) 15 Page - Microchip Technology

MCP2200 Datasheet(HTML) 15 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Datasheet Descarga

Enlace URL