MP3V5004G

Sensors

2

Freescale Semiconductor

Pressure

Operating Characteristics

Characteristic

Symbol

Min

Typ

Max

Unit

Pressure Range

0

—

3.92

400

kPa

1. Device is ratiometric within this specified excitation range.

2.7

3.0

3.3

Supply Current

—

—

10

mAdc

(2)

2. Span is defined as the algebraic difference between the output voltage at specified pressure and the output voltage at the minimum rated

pressure.

—

1.8

—

V

4. Accuracy (error budget) consists of the following:

Linearity:

Output deviation from a straight line relationship with pressure over the specified pressure range.

Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to and

from the minimum or maximum operating temperature points, with zero differential pressure applied.

Pressure Hysteresis:

Output deviation at any pressure within the specified range, when this pressure is cycled to and from the minimum

or maximum rated pressure, at 25

°C.

Offset Stability:

Output deviation, after 1000 temperature cycles, -30

° to 100°C, and 1.5 million pressure cycles, with minimum

rated pressure applied.

TcSpan:

Output deviation over the temperature range of 10

° to 60°C, relative to 25°C.

TcOffset:

Output deviation with minimum rated pressure applied, over the temperature range of 10

° to 60°C, relative to 25°C.

Variation from Nominal:

0.45

0.6

0.75

V

Sensitivity

V/P

—

0.6

5.9

—

V/kPa

5. Auto-Zero at Factory Installation: Due to the sensitivity of the MP3V5004G, external mechanical stresses and mounting position can affect

the zero pressure output reading. Auto-zeroing is defined as storing the zero pressure output reading and subtracting this from the device's

output during normal operations. Reference AN1636 for specific information. The specified accuracy assumes a maximum temperature

change of ±5

°C between auto-zero and measurement.

—

—

—

—

—

—

±1.5

±2.5