HT86B05 datasheet(69/79 Pages) HOLTEK

69 / 79 page

SIZ [m]

Skip if increment Data Memory is 0

Description

The contents of the specified Data Memory are first incremented by 1. If the result is 0, the

following instruction is skipped. As this requires the insertion of a dummy instruction while

the next instruction is fetched, it is a two cycle instruction. If the result is not 0 the program

proceeds with the following instruction.

Operation

[m]

¬ [m]+1

Skip if [m] = 0

Affected flag(s)

None

SIZA [m]

Skip if increment Data Memory is zero with result in ACC

Description

The contents of the specified Data Memory are first incremented by 1. If the result is 0, the

following instruction is skipped. The result is stored in the Accumulator but the specified

Data Memory contents remain unchanged. As this requires the insertion of a dummy in-

struction while the next instruction is fetched, it is a two cycle instruction. If the result is not

0 the program proceeds with the following instruction.

Operation

ACC

¬ [m]+1

Skip if ACC = 0

Affected flag(s)

None

SNZ [m].i

Skip if bit i of Data Memory is not 0

Description

If bit i of the specified Data Memory is not 0, the following instruction is skipped. As this re-

quires the insertion of a dummy instruction while the next instruction is fetched, it is a two

cycle instruction. If the result is 0 the program proceeds with the following instruction.

Operation

Skip if [m].i

¹ 0

Affected flag(s)

None

SUB A,[m]

Subtract Data Memory from ACC

Description

The specified Data Memory is subtracted from the contents of the Accumulator. The result

is stored in the Accumulator. Note that if the result of subtraction is negative, the C flag will

be cleared to 0, otherwise if the result is positive or zero, the C flag will be set to 1.

Operation

ACC

¬ ACC - [m]

Affected flag(s)

OV, Z, AC, C

SUBM A,[m]

Subtract Data Memory from ACC with result in Data Memory

Description

The specified Data Memory is subtracted from the contents of the Accumulator. The result

is stored in the Data Memory. Note that if the result of subtraction is negative, the C flag will

be cleared to 0, otherwise if the result is positive or zero, the C flag will be set to 1.

Operation

[m]

¬ ACC - [m]

Affected flag(s)

OV, Z, AC, C

SUB A,x

Subtract immediate data from ACC

Description

The immediate data specified by the code is subtracted from the contents of the Accumu-

lator. The result is stored in the Accumulator. Note that if the result of subtraction is nega-

tive, the C flag will be cleared to 0, otherwise if the result is positive or zero, the C flag will

be set to 1.

Operation

ACC

¬ ACC - x

Affected flag(s)

OV, Z, AC, C

HT86BXX/HT86BRXX

Rev. 1.60

October 20, 2009

HT86B05 Datasheet(PDF) 69 Page - Holtek Semiconductor Inc

HT86B05 Datasheet(HTML) 69 Page - Holtek Semiconductor Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79

Datasheet Descarga

Enlace URL