RC-741 datasheet(21/24 Pages) BOSER

No. de pieza	RC-741

Descripción Electrónicos	19??4U High, Full-size Rackmount Chassis

PDF	24 Pages

Scroll/Zoom	100%

Fabricante Electrónico	BOSER [BOSER Technology Co., Ltd]

Página de inicio	http://www.boser.com.tw

Logo

21 / 24 page

3.2.4 Installation Disk Drives

The RC-741 has shock-resistant drive bay providing mounting space

for up to one removable shock-resistant drives Drive sizes can be in

eight 3.5” HDD and one 5.25” CD-ROM. 5.25” CD-ROM out of the

installed drives is accessible from the front panel.

Examine the disk drive cage and locate the screws attached to it.

There are four screws that hold the drive cage from the external

right side of the panel. See the figure on the right for the exact

location of these four screws. Remove these screws then gently

pull the drive cage off the chassis. You may now install the drives

at your preferred locations.

Secure the mounting of all the drives before you return the drive

cage back into its original position.

Mount back the screws you removed from Steps 2 and 3.

RC-741 Datasheet(PDF) 21 Page - BOSER Technology Co., Ltd