SUPERWORLD ELECTRONICS (S) PTE LTD

NOTE : Specifications subject to change without notice. Please check our website for latest information.

PG. 7

15.01.2008

L825HW SERIES

11-4. Tearing Off Force

The force for tearing off cover tape is 15 to 60 grams

in the arrow direction under the following conditions.

a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils.

1. Storage Conditions :

To maintain the solderabililty of terminal electrodes :

a) Temperature and humidity conditions : Less than 30°C and 70% RH.

b) Recommended products should be used within 6 months from the time of delivery.

c) The packaging material should be kept where no chlorine or sulfur exists in the air.

b) The use of tweezers or vacuum pick up is strongly recommended for individual components.

c) Bulk handling should ensure that abrasion and mechanical shock are minimized.

2. Transportation :

Application Notice

Top cover tape

F

Base tape

165° to 180°

Room Temp.

(°C)

5~35

Room Humidity

(%)

45~85

Tearing Speed

(mm/min)

300

Room atm

(hPa)

860~1060

HIGH CURRENT MOLDED POWER INDUCTORS