UL Listed, IP-20 Enclosed

Power Distribution Block

Offer High SCCR

the following equipment must be marked with an assembly SCCR:

• Industrial Control Panels [409.110]

• Industrial Machinery Electrical Panels [670.3(A)]

• Certain HVAC Equipment [440.4(B)]

This SCCR is based on the lowest-rated component, or weakest link,

in the assembly. Unmarked power distribution blocks will default to a

offers both high SCCR and enhanced shock protection.

• UL Listing Meets Requirements Eliminating

Investigation and Procedures

Listed to UL1953 for minimum spacing requirements of at least 1˝

through air and 2˝ over surface as required for UL508A industrial

control panel feeder applications. See back page.

• High SCCR

Up to 200kA rating enables the power distribution block to be one

of the highest rated devices in the panel. This helps achieve a high

assembly SCCR.

• Enclosed for Enhanced Electrical Safety

Safer work conditions. IP-20 finger-safe under specific conditions.

• Easy Panel Mounting

Gangable for flexible multi-pole installations, plus small footprint for

tight spacing.

• Simple and Fast Installation

DIN rail mount or panel mount, (See datasheet 1049). Captive

terminal screws are backed out at the factory.

• Meet Wireway Requirements

requirement.

Maximize Short-Circuit

Current Rating While

Improving Safety

Power Distribution Block