M38042F9HKP datasheet(26/387 Pages) RENESAS

26 / 387 page

1-8

REJ09B0212-0100Z

Rev.1.00

Jan 14, 2005

3804 Group (Spec.H)

HARDWARE

FUNCTIONAL DESCRIPTION

CENTRAL PROCESSING UNIT (CPU)

The 3804 group (Spec. H) uses the standard 740 Family instruc-

tion set. Refer to the table of 740 Family addressing modes and

machine instructions or the 740 Family Software Manual for de-

tails on the instruction set.

Machine-resident 740 Family instructions are as follows:

The FST and SLW instructions cannot be used.

The STP, WIT, MUL, and DIV instructions can be used.

[Accumulator (A)]

The accumulator is an 8-bit register. Data operations such as data

transfer, etc. are executed mainly through the accumulator.

[Index Register X (X)]

The index register X is an 8-bit register. In the index addressing

modes, the value of the OPERAND is added to the contents of

[Index Register Y (Y)]

The index register Y is an 8-bit register. In partial instruction, the

value of the OPERAND is added to the contents of register Y and

specifies the real address.

Fig. 6 740 Family CPU register structure

[Stack Pointer (S)]

The stack pointer is an 8-bit register used during subroutine calls

and interrupts. This register indicates start address of stored area

(stack) for storing registers during subroutine calls and interrupts.

The low-order 8 bits of the stack address are determined by the

contents of the stack pointer. The high-order 8 bits of the stack ad-

dress are determined by the stack page selection bit. If the stack

page selection bit is “0” , the high-order 8 bits becomes “0016”. If

the stack page selection bit is “1”, the high-order 8 bits becomes

“0116”.

The operations of pushing register contents onto the stack and

popping them from the stack are shown in Figure 7.

Store registers other than those described in Figure 6 with pro-

gram when the user needs them during interrupts or subroutine

calls (see Table 3).

[Program Counter (PC)]

The program counter is a 16-bit counter consisting of two 8-bit

registers PCH and PCL. It is used to indicate the address of the

next instruction to be executed.

Accumulator

b15

Index register X

Index register Y

Stack pointer

PCL

Program counter

PCH

N V T B D I Z C

Processor status register (PS)

Carry flag

Zero flag

Interrupt disable flag

Decimal mode flag

Break flag

Index X mode flag

Overflow flag

Negative flag

FUNCTIONAL DESCRIPTION

M38042F9HKP Datasheet(PDF) 26 Page - Renesas Technology Corp

M38042F9HKP Datasheet(HTML) 26 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL