M38048F8HKP datasheet(76/387 Pages) RENESAS

76 / 387 page

1-58

REJ09B0212-0100Z

Rev.1.00

Jan 14, 2005

3804 Group (Spec.H)

HARDWARE

FUNCTIONAL DESCRIPTION

D/A CONVERTER

The 3804 group (Spec. H) has two internal D/A converters (DA1

and DA2) with 8-bit resolution.

The D/A conversion is performed by setting the value in each DA

conversion register. The result of D/A conversion is output from

the DA1 or DA2 pin by setting the DA output enable bit to “1”.

When using the D/A converter, the corresponding port direction

The output analog voltage V is determined by the value n (decimal

notation) in the DA conversion register as follows:

V = VREF ✕ n/256 (n = 0 to 255)

Where VREF is the reference voltage.

At reset, the DA conversion registers are cleared to “0016”, and

the DA output enable bits are cleared to “0”, and the P30/DA1 and

P31/DA2 pins become high impedance.

The DA output does not have buffers. Accordingly, connect an ex-

ternal buffer when driving a low-impedance load.

Fig. 52 Block diagram of D/A converter

Fig. 53 Equivalent connection circuit of D/A converter (DA1)

P30/DA1

DA1 conversion register (8)

R-2R resistor ladder

DA1 output enable bit

P31/DA2

DA2 conversion register (8)

R-2R resistor ladder

DA2 output enable bit

AVSS

VREF

“0”

“1”

MSB

“0”

“1”

2R2R

LSB

P30/DA1

DA1 conversion register

DA1 output enable bit

M38048F8HKP Datasheet(PDF) 76 Page - Renesas Technology Corp

M38048F8HKP Datasheet(HTML) 76 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL