NO

Item

Criterion

AQL

0.65

0.65

0.65

12

General

appearance

12.1 No oxidation, contamination, curves or, bends on

interface Pin (OLB) of TCP.

12.2 No cracks on interface pin (OLB) of TCP.

12.3 No contamination, solder residue or solder balls on

product.

12.4 The IC on the TCP may not be damaged, circuits.

12.5 The uppermost edge of the protective strip on the

interface pin must be present or look as if it cause the

interface pin to sever.

12.6 The residual rosin or tin oil of soldering (component or

chip component) is not burned into brown or black color.

12.7 Sealant on top of the ITO circuit has not hardened.

12.8 Pin type must match type in specification sheet.

12.9 LCD pin loose or missing pins.

12.10 Product packaging must the same as specified on

packaging specification sheet.

12.11 Product dimension and structure must conform to

product specification sheet.

2.5

0.65

2.5

2.5

2.5

2.5

2.5

0.65

Precautions in use of LCD Modules

(1)Avoid applying excessive shocks to the module or making any alterations or modifications

to it.

(2)Don’t make extra holes on the printed circuit board, modify its shape or change the

components of LCD module.

(3)Don’t disassemble the LCM.

(4)Don’t operate it above the absolute maximum rating.

(5)Don’t drop, bend or twist LCM.

(6)Soldering: only to the I/O terminals.

(7)Storage: please storage in anti-static electricity container and clean environment.

(8)

have the right to change the passive components

(Resistors,capacitors and other passive components will have different appearance and

color caused by the different supplier.)

(9)

have the right to change the PCB Rev.

Page 24 of 25