4

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

1. If not already fitted, clip the

shoulder strap to the attachment

points. Adjust the strap length as

required using the buckles.

2. Screw the lance assembly onto

the trigger/handle assembly.

• The other end of the hose

should already be connected

to the container.

3. Make sure that all connections

are fully hand tightened to

prevent leaks and loss of pressure.

NOTE: Do not overtighten the

components. Leave a gap

as shown.