7

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

1. Work Light ON/OFF switch

2. Lamp/Work light

3. Red LED (charging)

4. Green LED (charged)

5. On/Off Switch

6. 12V DC socket connection

7. Alert LED (incorrect polarity alarm)

8. Battery condition gauge

9. Test push button

10. Negative (-) battery connection lead

11. Positive (+) battery connection lead

12. 12V charging jack socket

13. 12/24V Selector

14. 230V mains charging adaptor

15. 12V DC adaptor lead with jack plug

INITIAL BATTERY CHARGING

1. Charge your jumpstart battery before using it for the first time.

2. Recharge the jumpstart battery after every occasion of use if possible, and

thereafter, at least every 30 days.

3. Always avoid leaving your jumpstart in a state of discharge.

FOLLOW THE ABOVE POINTS TO ENSURE MAXIMUM LIFE FROM THE BATTERY.

Two means of charging the battery are provided:

1. Via a mains electricity supply,

using the mains adaptor, shown in

Fig 1.

2. Via a 12V vehicle supply using the

cigarette lighter adapter with

cable and plug provided, shown.

NOTE: Using a 12V vehicle supply,

the battery will not charge to

maximum, but only to

approx. 50% of its capacity.