4

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY SYMBOLS

PREPARING THE STAPLE/NAIL GUN FOR USE

CONNECTION TO THE COMPRESSED AIR SYSTEM

1. Ensure that the pressure supplied by the compressed air system does not

exceed the maximum allowable pressure of the staple/nail gun See

“Specification” on page 8.

2. Make sure that the safety yoke is not depressed.

3. Connect the staple/nail gun to the compressed air supply using suitable

hose equipped with quick-action connectors.

4. Check for proper functioning by applying the muzzle of the staple/nail gun

to a piece of wood and actuating the trigger once or twice.

Read manual

before use

Wear ear defenders

Wear suitable eye

protection

Do not use on

scaffolding or ladders

May only be used

with an effective

safety yoke

CAUTION: READ AND OBSERVE THESE OPERATING INSTRUCTION BEFORE

USING THE STAPLE/NAIL GUN.

WARNING: ENSURE THE AIR SUPPLY IS CLEAN AND DOES NOT EXCEED

100PSI WHILE OPERATING THE NAIL/STAPLE GUN.