PC0801ARS-0 datasheet(41/65 Pages) POWERTIP

41 / 65 page

ST7066U

V2.0

2001/03/01

18/42

Instruction Description

" Clear Display

Clear all the display data by writing "20H" (space code) to all DDRAM address, and set DDRAM address to

"00H" into AC (address counter). Return cursor to the original status, namely, bring the cursor to the left edge

on first line of the display. Make entry mode increment (I/D = "1").

" Return Home

Return Home is cursor return home instruction. Set DDRAM address to "00H" into the address counter.

Return cursor to its original site and return display to its original status, if shifted. Contents of DDRAM does

not change.

" Entry Mode Set

Set the moving direction of cursor and display.

$" I/D : Increment / decrement of DDRAM address (cursor or blink)

When I/D = "High", cursor/blink moves to right and DDRAM address is increased by 1.

When I/D = "Low", cursor/blink moves to left and DDRAM address is decreased by 1.

* CGRAM operates the same as DDRAM, when read from or write to CGRAM.

$" S: Shift of entire display

When DDRAM read (CGRAM read/write) operation or S = "Low", shift of entire display is not performed. If

S = "High" and DDRAM write operation, shift of entire display is performed according to I/D value (I/D =

"1" : shift left, I/D = "0" : shift right).

I/D

Description

Shift the display to the left

Shift the display to the right

Code

DB7

DB6

DB5

DB4

DB1

DB2

DB3

I/D

DB0

PC0801ARS-0 Datasheet(PDF) 41 Page - Powertip Technology