
CYIWOSC1300AA
PRELIMINARY
Document #: 38-19008 Rev. *A
Page 21 of 31
Address
Register Name
Reset Value
R/W
Clients / Description
30
SEQ_B_ORIG_ROI
0x0101
R/W
record B Region Of Interest origin
Bits
7:0
B_X1_ROI[7:0]
1d
record B address of first pixel in ROI; multiply by 8 to get
the effective address; 8/8 in normal operation.
15:8
B_Y1_ROI[7:0]
1d
record B address of first line in ROI; multiply by 8 to get the
effective address; 8/8 in normal operation.
Address
Register Name
Reset Value
R/W
Clients / Description
31
SEQ_A_SIZE_ROI
0x80A0
R/W
record A physical ROI size
Bits
7:0
A_XD_ROI[7:0]
160d
record A ROI line length in physical pixels; multiply by 8 to
get the effective length; 1280/8 in normal operation.
15:8
A_YD_ROI[7:0]
128d
record A ROI frame height in physical lines; multiply by 8
to get the effective length; 1024/8 in normal operation.
Address
Register Name
Reset Value
R/W
Clients / Description
32
SEQ_B_SIZE_ROI
0x80A0
R/W
record B physical ROI size
Bits
7:0
B_XD_ROI[7:0]
160d
record B ROI line length in physical pixels; multiply by 8 to
get the effective length; 1280/8 in normal operation.
15:8
B_YD_ROI[7:0]
128d
record B ROI frame height in physical lines; multiply by 8
to get the effective length; 1024/8 in normal operation.
Address
Register Name
Reset Value
R/W
Clients / Description
33
SEQ_A_DUMMY
0x0100
R/W
record A number of dummy pixels and lines
Bits
7:0
A_XD_DUMMY[7:0]
0d
record A dummy pixels (ref non-subsampled array);
multiply by 8 to get the effective number. These pixels are
appended at the end of each line, but do not appear at the
output. Use this to set desired line time or to clear pipelines
in the image signal processor.
15:8
A_YD_DUMMY[7:0]
1d
record A dummy lines (ref non-subsampled array); multiply
by 8 to get the effective number. These lines are appended
to the frame, but do not appear in the output. Use this to
set desired frame time, to clear pipelines in the image
signal processor, or to enforce an exposure time in excess
of the number of physical lines. Minimum value is 1.
Address
Register Name
Reset Value
R/W
Clients / Description
34
SEQ_B_DUMMY
0x0100
R/W
record B number of dummy pixels and lines
Bits
7:0
B_XD_DUMMY[7:0]
0d
record B dummy pixels (ref non-subsampled array); multi-
ply by 8 to get the effective number. These pixels are ap-
pended at the end of each line, but do not appear at the
output. Use this to set desired line time or to clear pipelines
in the image signal processor.
15:8
B_YD_DUMMY[7:0]
1d
record A dummy lines (ref non-subsampled array); multiply
by 8 to get the effective number. These lines are appended
to the frame, but do not appear in the output. Use this to
set desired frame time, to clear pipelines in the image
signal processor, or to enforce an exposure time in excess
of the number of physical lines. Minimum value is 1.