TPS2480PW datasheet(17/60 Pages) TI2

No. de pieza	TPS2480PW

Descripción Electrónicos	Positive Voltage Intelligent Protection Device Hotswap Controller and I2C Current Monitor

PDF	60 Pages

Scroll/Zoom	100%

Fabricante Electrónico	TI2 [Texas Instruments]

Página de inicio	https://www.ti.com

Logo

17 / 60 page

TPS2480

TPS2481

www.ti.com

SLUS939B – APRIL 2010 – REVISED DECEMBER 2010

Response to a Hard Output Short (Figure 14 and Figure 15)

Figure 14 shows the short circuit response over the full time-out period. This begins when the output voltage falls

and ends when the external FET is turned off. The external FET current is actively controlled by the power

limiting engine and gate amplifier circuit while the TIMER pin charges CT to the 4-V threshold. Once this

threshold is reached, the TPS2480/81 disable and latch off the external FET. The TPS2480 remains latched off

until either the input voltage drops below the UVLO threshold or EN cycles through the false (low) state. The

TPS2481 will attempt a restart after going through a timing cycle.

Figure 14. Current Limit Overview

Submit Documentation Feedback

Product Folder Link(s): TPS2480 TPS2481

TPS2480PW Datasheet(PDF) 17 Page - Texas Instruments