5 Pin Configuration and Functions

1

OUT

2

GND

3

IN

4

NC

5

NC

Not to scale

Figure 5-1. DBV Package, 5-Pin SOT-23 (Top View)

Table 5-1. Pin Functions

PIN

TYPE

DESCRIPTION

NAME

DBV

OUT

1

O

Output of the regulator. A capacitor with a value of 1 µF or larger is required from this

pin to ground.(1) See the Input and Output Capacitor Requirements section for more

information.

GND

2

—

Ground pin.

IN

3

I

Input supply pin. A capacitor with a value of 0.1 µF or larger is recommended from

this pin to ground. See the Input and Output Capacitor Requirements section for more

information.

NC

4, 5

—

Not internally connected. This pin can be left open or tied to ground for improved

thermal performance.

(1)

The nominal output capacitance must be greater than 0.47 µF. Throughout this document, the nominal derating on these capacitors is

50%. Make sure that the effective capacitance at the pin is greater than 0.47 µF.

www.ti.com

TLV701

SBVS161A – NOVEMBER 2011 – REVISED APRIL 2023

Copyright © 2023 Texas Instruments Incorporated

Submit Document Feedback

3

Product Folder Links: TLV701