7

TLV172, TLV2172, TLV4172

www.ti.com

SBOS784C – NOVEMBER 2016 – REVISED JANUARY 2019

Product Folder Links: TLV172 TLV2172 TLV4172

Submit Documentation Feedback

Copyright © 2016–2019, Texas Instruments Incorporated

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended

Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

Transient conditions that exceed these voltage ratings must be current limited to 10 mA or less.

(3)

See the Electrical Overstress section for more information.

(4)

Short-circuit to ground, one amplifier per package.

7 Specifications

7.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)

(1)

MIN

MAX

UNIT

Voltage

Supply voltage, [(V+) – (V

−)]

40

V

Single-supply voltage

40

Signal input pin(2)

Common-mode

(V–) – 0.5

(V+) + 0.5

Differential(3)

–0.5

0.5

Current

Signal input pin

–10

10

mA

Output short-circuit(4)

Continuous

Temperature

Operating, TA

–55

150

°C

Junction, TJ

150

Storage, Tstg

–65

150

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

7.2 ESD Ratings

VALUE

UNIT

V(ESD)

Electrostatic discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±4000

V

Charged-device model (CDM), per JEDEC specification JESD22-C101(2)

±1000

7.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

MIN

NOM

MAX

UNIT

Supply voltage, (V+) – (V–)

Single-supply

4.5

36

V

Dual-supply

±2.25

±18

Specified temperature

–40

125

°C