Fiber Systems

169

More information online at

bannerengineering.com

D10 Series

D10 Expert™ with Numeric Display—Dual-Discrete Specifications

Required Fiber Optic Cable

Banner P-Series plastic fibers (See Plastic Fiber Optic section, page 182)

Supply Voltage and Current

12 to 24V dc (10% max. ripple) at less than 65 mA, exclusive of load

Supply Protection Circuitry

Protected against reverse polarity and transient voltage.

Output Configuration

Two independently configured current sourcing (PNP) or current sinking (NPN) solid-state transistors.

Output Rating

150 mA max. load

OFF-state leakage current: less than 10 µA at 24V dc

ON-state saturation voltage:

NPN less than 1.5V at 150 mA load

PNP less than 2.5V at 150 mA load

Output Protection Circuitry

Protected against false pulse on power-up and continuous short-circuit

Output Response Time

Programmable, 50 microseconds, 200 microseconds, 1 millisecond, 2.5 milliseconds

NOTE: < 1 second delay on power-up; outputs do not conduct during this time.

Adjustments

Two push buttons or remote programming of (TEACH) switching threshold response time, OFF-delay, light/dark

operate, and display

Indicators

Four-digit digital display plus LED indicators for active channel, push-button lockout, OFF-delay and light/dark

operate selection; two yellow LEDs serve as output indicators and active channel indicator.

Construction

Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover.

Environmental Rating

NEMA 1; IEC IP50

Connections

PVC-jacketed 2 m or 9 m 6-wire integral cable or integral 6-pin Pico-style quick-disconnect fitting. QD cables are

ordered separately. See page 379.

Operating Conditions

Temperature: -20° to +55° C Storage Temperature: -20° to +80° C Relative humidity: 90% @ 50° C

Number of Devices Stacked

Ambient Temperature Rating

Load Specification

3

55° C

150 mA

7

50° C

50 mA

10

45° C

50 mA

Installation

35 mm DIN rail or included mounting bracket

Certifications

Hookup Diagrams

NPN Models: DC21 (p. 481)

PNP Models: DC22 (p. 481)

D10 Expert™ with Numeric Display—Analog/Discrete Specifications

Required Fiber Optic Cable

Banner P-Series plastic fibers (See Plastic Fiber Optic section, page 182)

Supply Voltage and Current

4-20 mA Analog Models: 12-24V dc (10% max. ripple) at less than 65 mA exclusive of load

0-10V dc Analog Models: 15-24V dc (10% max. ripple) at less than 70 mA exclusive of load

Supply Protection Circuitry

Protected against reverse polarity and transient voltage.

Output Configuration

2 independently configurable outputs, depending on model:

NPN w/analog (4-20 mA or 0-10V) or PNP w/analog (4-20 mA or 0-10V)

Output Rating

Discrete Output: 150 mA, max. load

OFF-state leakage current:

< 10 µA at 24V dc

ON-state saturation voltage: NPN < 1.5V @ 150 mA

PNP < 2.5V @ 150 mA

Analog Output: 4-20 mA or 0-10V dc

Load: 4-20 mA Models: 100

Ω max. impedance

0-10V dc Models: 1 M

Ω min. impedance

Output Protection Circuitry

Protected against false pulse on power-up and continuous short-circuit

Output Response Time

Discrete Output: Programmable, 50 microseconds, 200 microseconds, 1 millisecond, 2.5 milliseconds

Analog Output: 1 millisecond

NOTE: < 1 second delay on power-up; outputs do not conduct during this time.

Adjustments

Push-button or remote programming of (TEACH) switching threshold response time, OFF-delay, light/dark operate, and display

Indicators

Four-digit digital display plus LED indicators for active channel, push-button lockout, OFF-delay and light/dark

operate selection; two yellow output indicators.