RF430CL331H datasheet(36/63 Pages) TI2

No. de pieza	RF430CL331H

Descripción Electrónicos	RF430CL331H NFC Type 4B Dynamic Dual Interface Transponder

PDF	63 Pages

Scroll/Zoom	100%

Fabricante Electrónico	TI2 [Texas Instruments]

Página de inicio	https://www.ti.com

Logo

36 / 63 page

RF430CL331H

SLASE18A – SEPTEMBER 2015 – REVISED NOVEMBER 2015

www.ti.com

Table 5-11. General Control Register Description (continued)

BIT

FIELD

TYPE

RESET

DESCRIPTION

Global interrupt output enable

0b = Interrupt output disabled. The INTO pin is Hi-Z.

Enable INT

R/W

1b = Interrupt output enabled. The INTO pin signals any enabled interrupt

according to the INTO High and INTO Drive bits.

Global enable of RF interface. This bit must be set before the PICC can

respond to any RF commands.

Enable RF

R/W

0b = RF interface disabled

1b = RF interface enabled

Software reset

0b = Always reads 0.

SW-Reset

1b = Resets the device to default settings and clears memory. The serial

communication is restored after tReady, and the register settings and NDEF

memory must be restored afterward.

Detailed Description

Submit Documentation Feedback

Product Folder Links: RF430CL331H

RF430CL331H Datasheet(PDF) 36 Page - Texas Instruments