PCM1870 datasheet(12/52 Pages) TI2

No. de pieza	PCM1870

Descripción Electrónicos	16-Bit Low-Power Stereo Audio ADC With Microphone Bias and Microphone Amplifier

PDF	52 Pages

Scroll/Zoom	100%

Fabricante Electrónico	TI2 [Texas Instruments]

Página de inicio	https://www.ti.com

Logo

12 / 52 page

www.ti.com

Zero-Cross Detection

Power Up/Down for Each Module

Digital Interface

Power Supply

PCM1870

SLAS544A – MAY 2007 – REVISED SEPTEMBER 2007

Zero-cross detection minimizes audible zipper noise while changing analog volume and digital attenuation. This

function can be applied to digital input or digital output by register 86 (ZCRS).

Using register 73 (PBIS), register 82 (PAIR, PAIL, PADS, PMCB, PADR, PADL), and register 90 (PCOM),

unused modules can be powered down to minimize power consumption (13 mW when recording only).

All digital I/O pins can interface at various power supply voltages. The VIO pin can be connected to a 1.71-V to

3.6-V power supply.

The VCC pin can be connected to 2.4 V to 3.6 V. The VDD pin and VIO pin can be connected to 1.71 to 3.6 V. A

different voltage can be applied to each of these pins (for example, VDD = 1.8 V, VIO = 3.3 V).

Submit Documentation Feedback

Product Folder Link(s): PCM1870

PCM1870 Datasheet(PDF) 12 Page - Texas Instruments