PIC12LF1501 datasheet(158/352 Pages) MICROCHIP

158 / 352 page

PIC16(L)F1503

DS40001607D-page 158

 2011-2015 Microchip Technology Inc.

FIGURE 21-4:

SPI MASTER AND MULTIPLE SLAVE CONNECTION

21.2.1

SPI MODE REGISTERS

The MSSP module has five registers for SPI mode

operation. These are:

• MSSP STATUS register (SSPxSTAT)

• MSSP Control Register 1 (SSPxCON1)

• MSSP Control Register 3 (SSPxCON3)

• MSSP Data Buffer register (SSPxBUF)

• MSSP Address register (SSPxADD)

• MSSP Shift register (SSPxSR)

(Not directly accessible)

SSPxCON1 and SSPxSTAT are the control and

STATUS registers in SPI mode operation. The

SSPxCON1 register is readable and writable. The

lower six bits of the SSPxSTAT are read-only. The

upper two bits of the SSPxSTAT are read/write.

In SPI master mode, SSPxADD can be loaded with a

value used in the Baud Rate Generator. More informa-

tion on the Baud Rate Generator is available in

Section21.7 “Baud Rate Generator”

SSPxSR is the shift register used for shifting data in

and out. SSPxBUF provides indirect access to the

SSPxSR register. SSPxBUF is the buffer register to

which data bytes are written, and from which data

bytes are read.

In receive operations, SSPxSR and SSPxBUF

together create a buffered receiver. When SSPxSR

receives a complete byte, it is transferred to SSPxBUF

and the SSPxIF interrupt is set.

During transmission, the SSPxBUF is not buffered. A

write to SSPxBUF will write to both SSPxBUF and

SSPxSR.

SCKx

SDOx

SDIx

General I/O

SPI Master

SPI Slave

SSx

General I/O

Rev. 10-000079A

8/1/2013

PIC12LF1501 Datasheet(PDF) 158 Page - Microchip Technology

PIC12LF1501 Datasheet(HTML) 158 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL