Matters to Be Observed When Using This Product / Reference Information

■ To ensure insulation between the internal coil of the inductor and the upper surface of the board, avoid forming patterns

or vias in which voltage exceeding the guaranteed operating voltage is applied, on the uppermost layer of the board in

counter to the inductor bottom. (DUST series)

■ Do not form a pattern, via, etc., on the counter to the bottom of the inductor. (MC series/* Fig.1, Dust type/*Fig.2)

■ Keep a component placed around the inductor from being in contact with the surface (top face, side face) of the inductor.

(MC series/* Fig. 3)

■ Different from a ferrite core type with a magnetic energy concentration gap, the inductor described herein has a vertical

leakage flux distribution.

Exercise special caution when using a component or a circuit configuration susceptible to leakage flux from an inductor.

On the inductor package, a product number, the number of components, and the place of origin are indicated. Usually,

the place of origin is written in English.

25-Dec-24

Fig.1

Fig.2

　Labeling on package

Reference information

Fig.3

Counter to the bottom part

8.4

2.8

10

(PWB)

Side face

Top face

Counter to the

bottom part

Side face

10.35

10.35

1.9

4.4

Counter to the bottom part