Matters to Be Observed When Using This Product / Reference information

■ Do not store the capacitor in a place where moisture, dust, or corrosive gas (hydrogen chloride, hydrogen sulfide, sulfur

dioxide, ammonia, etc.) is present. It may impair the solderability of the external electrodes.

■ Avoid a high-temperature/high-humidity place and keep the capacitor in a place where the temperature/humidity condition

is controlled at 35 ℃ and 85%RH or lower.

■ A capacitor kept in storage for a long period will have oxidized leads surface resulting in lower solderability.

Make the storage period as short as possible (about 6 months).

Storage conditions vary depending on capacitor types. For more detailed information, please contact us.

Before using the capacitor, make sure to acquire our delivery specification sheet and confirm service conditions.

If you find measurement values exceeding specified values in the specification sheet or have any question, feel free to

contact us. We also advise you to refer to RCR-1001B "Safety Application Guide on Components for Use in Electronic

and Electrical Equipment" and JEITA RCR-2350D "Safety Application Guide for Fixed Plastic Film Capacitors for Use

in Electronic Equipment."

23-Apr-25

　 Storage conditions

Reference information

　Guidelines