www.sensata.com

Copyright © 2019 Sensata Technologies, Inc.

Page 11

Incremental with Commutation Track Version

• Once the program has recognized a valid connection between the programming tool and the computer,

then the encoder and the programming tool, two green check marks will appear in the upper right hand

corner.

• Select the resolution – this is the number of cycles per turn that the encoder will generate. Also

sometimes referred to as counts or CPT.

• Next, choose the number of commutation pair poles from one to 16

• Phase advance determines whether the encoder sequence of the data channels: whether A leads B

Clockwise (CW) or Counterclockwise (CCW). This also affects the direction of the commutation cycles

as well.

• You have a choice of three different index track widths: 90° (1/4 cycle), 180° (1/2 cycle) or 360° (Full

Cycle)

• You can also choose the relationship between the index and the other data tracks.

Once you have the encoder set the way you want it, end the programming sequence by a click on the

Program button.

AGENCY APPROVALS & CERTIFICATIONS

UL International France S.A.

Espace Technologique, Bâtiment Explorer Route

de l’Orme F-91190 SAINT-AUBIN France

T:: +33 1 60 19 88 00

F:: +33 1 60 19 88 80

Proc. Cont. Eq.

E477663

GENERAL NOTES

(A) For detailed installation instructions and recommend screw torques refer to the User’s Manual