The Embedded I/O Company

TIP500

16 Channels of Isolated 12 bit A/D Conversion

Application Information

The TIP500 is an IndustryPack® compatible module with

16 single-ended or 8 differential channels of isolated 12 bit

A/D conversion. The data acquisition and conversion time

is up to 10µs without channel / gain change and up to

12.5µs with channel / gain change.

The input multiplexer offers analog overvoltage protection

of up to 70 Vpp. A programmable gain amplifier allows

gains of 1, 2, 5, 10 or 1, 2, 4, 8. The full-scale input range

is +/-10V for the TIP500-1xR and 0-10V for the TIP500-

2xR.

The isolated ADC, programmable gain amplifier and

multiplexer are powered by an on board DC/DC converter.

An interrupt can be generated at end-of-conversion

supporting an 8 bit vector. Each TIP500 is factory

calibrated. The calibration information is stored in the

Identification-PROM unique to each IP.

Software support (TIP500-SW-xx) for different operating

systems is available.

Technical Information

 Interface according to IndustryPack specification

 Identification-PROM supports auto-configuration

 Single Size IndustryPack

 16 single-ended or 8 differential channels of isolated

12 bit A/D conversion

 ESD protected input multiplexer

 Programmable gain amplifier, gain 1, 2, 5, 10 or gain

1, 2, 4, 8

 12 bit A/D converter with internal S/H and reference

 Full-scale input range +/- 10 V or 0-10V (gain = 1)

 Interrupt capability at end-of-conversion

 Factory calibrated, calibration information in

Identification-PROM unique to each IP

 Operating temperature –40°C to +85°C

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.1.1

2017-08-24

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com