DEC 04, 2006 revised to JAN 30, 2007

Page 5 of 6

www.power-one.com

PLP75 AC-DC Series Data Sheet

75 Watts

Regulatory & Safety Approvals

Parameter

Conditions/Description

Min.

Nom.

Max.

Units

UL60950-1

All single-output models are approved. Triple-

output models are pending.

CSA-C22.2,

No. 60950-1-03

All single-output models are approved. Triple-

output models are pending.

EN 60950-1

/IEC 60950-1

All single-output models are approved. Triple-

output models are pending.

CE Mark for LVD

All single-output models are approved. Triple-

output models are pending.

CB Approval

Completed for single-output models. Pending

for triple-output models.

Ground Leakage

Current

At 230 VAC.

1.4

mA

Mechanical Specifications

Parameter

Conditions/Description

Min.

Nom.

Max.

Units

Dimensions

Length

127

mm

Width

76.2

mm

Height, including component or component lead

protrusion on the bottom of the PCB.

35

mm

Power Density

With forced-air cooling.

4

W/cu in

Mounting

(Location/Hardware); see Outline Drawing.

Input

(Location/Connector);

J1 - Molex 26-62-4030 or equivalent.

Ground connector for

plastic chassis

Provided.

Output

(Location/Connector);

J2 - Molex 26-60-4060 or equivalent.

Outline Drawing

Pins/Functions

See Mechanical Drawing.

Weight

0.36

kg

Mounting distance

Note

1

0.113

in

Optional Accessories

Bracket, enclosure with IEC connector and

switch, and cover options are offered. Consult

factory for details.

1

The minimum distance from the bottom of the component leads (solder side) or top of the components (component side) to the customer's

metal chassis should be at least 0.113 " (2.85 mm).