LLCC68 datasheet(89/106 Pages) SEMTECH

No. de pieza	LLCC68

Descripción Electrónicos	Long Range, Low Power, sub-GHz RF Transceiver

PDF	106 Pages

Scroll/Zoom	100%

Fabricante Electrónico	SEMTECH [Semtech Corporation]

Página de inicio	http://www.semtech.com

Logo

89 / 106 page

LLCC68

Data Sheet

Rev. 1.0

DS.LLCC68.W.APP

July 2019

89 of 106

Semtech

www.semtech.com

13.4.9 SetLoRaSymbNumTimeout

This command sets the number of symbols used by the modem to validate a successful reception.

In LoRa® mode, when going into Rx, the modem will lock as soon as a LoRa® symbol has been detected which may lead to

false detection. This phenomena is quite rare but nevertheless possible. To avoid this, the command

SetLoRaSymbNumTimeout can be used to define the number of symbols which will be used to validate the correct

reception of a packet.

When the SymbNum parameter is set the 0, the modem will validate the reception as soon as a LoRa® Symbol has been

detected.

When SymbNum is different from 0, the modem will wait for a total of SymbNum LoRa® symbol to validate, or not, the

correct detection of a LoRa® packet. If the various states of the demodulator are not lock at this moment, the radio will

generate the RxTimeout IRQ.

Table 13-75: SetLoRaSymbNumTimeout SPI Transaction

Byte

Data from host

Opcode = 0xA0

SymbNum

LLCC68 Datasheet(PDF) 89 Page - Semtech Corporation