L320DB12VC datasheet(36/57 Pages) AMD

36 / 57 page

Am29LV320D

December 14, 2005

DA TA SH EET

ABSOLUTE MAXIMUM RATINGS

Storage Temperature

Plastic Packages . . . . . . . . . . . . . . . –65

°C to +150°C

Ambient Temperature

with Power Applied. . . . . . . . . . . . . . –65

°C to +125°C

Voltage with Respect to Ground

CC (Note 1) . . . . . . . . . . . . . . . . . –0.5 V to +4.0 V

A9, OE#, RESET#,

and WP#/ACC (Note 2) . . . . . . . –0.5 V to +12.5 V

All other pins (Note 1) . . . . . . –0.5 V to VCC +0.5 V

Output Short Circuit Current (Note 3) . . . . . . . 200 mA

Notes:

1. Minimum DC voltage on input or I/O pins is –0.5 V.

Dur ing voltage transitions, input or I/O pins may

overshoot V

SS to –2.0 V for per iods of up to 20 ns.

Maximum DC voltage on input or I/O pins is V

CC +0.5 V.

See Figure 8, on page 34. During voltage transitions,

input or I/O pins may overshoot to V

CC +2.0 V for periods

up to 20 ns. See Figure 9, on page 34.

2. Minimum DC input voltage on pins A9, OE#, RESET#,

and WP#/ACC is –0.5 V. During voltage transitions, A9,

OE#, WP#/ACC, and RESET# may overshoot V

SS to

–2.0 V for periods of up to 20 ns. See Figure 8, on page

34. Maximum DC input voltage on pin A9 is +12.5 V

which may overshoot to +14.0 V for periods up to 20 ns.

Maximum DC input voltage on WP#/ACC is +9.5 V which

may overshoot to +12.0 V for periods up to 20 ns.

3. No more than one output may be shorted to ground at a

time. Duration of the short circuit should not be greater

than one second.

Stresses above those listed under “Absolute Maximum

Ratings” may cause permanent damage to the device. This

is a stress rating only; functional operation of the device at

these or any other conditions above those indicated in the

operational sections of this data sheet is not implied.

Exposure of the device to absolute maximum rating

conditions for extended periods may affect device reliability.

OPERATING RANGES

Industrial (I) Devices

Ambient Temperature (T

A) . . . . . . . . . –40°C to +85°C

VCC Supply Voltages

CC for all devices . . . . . . . . . . . . . . . . . 2.7 V to 3.6 V

Operating ranges define those limits between which the

functionality of the device is guaranteed.

20 ns

+0.8 V

SS–0.5 V

20 ns

SS–2.0 V

Figure 8.

Maximum Negative

Overshoot Waveform

Figure 9.

Maximum Positive

Overshoot Waveform

20 ns

CC+2.0 V

CC+0.5 V

20 ns

2.0 V

L320DB12VC Datasheet(PDF) 36 Page - Advanced Micro Devices

L320DB12VC Datasheet(HTML) 36 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

Datasheet Descarga

Enlace URL