AT80C51RB2-SLSIM datasheet(30/83 Pages) ATMEL

No. de pieza	AT80C51RB2-SLSIM

Descripción Electrónicos	80C51 High Performance ROM 8-bit Microcontroller

PDF	83 Pages

Scroll/Zoom	100%

Fabricante Electrónico	ATMEL [ATMEL Corporation]

Página de inicio	http://www.atmel.com

Logo

30 / 83 page

AT80C51RD2/AT83C51Rx2

4113B–8051–03/05

PCA Capture Mode

To use one of the PCA modules in the capture mode either one or both of the CCAPM

bits CAPN and CAPP for that module must be set. The external CEX input for the mod-

ule (on port 1) is sampled for a transition. When a valid transition occurs the PCA

hardware loads the value of the PCA counter registers (CH and CL) into the module's

capture registers (CCAPnL and CCAPnH). If the CCFn bit for the module in the CCON

SFR and the ECCFn bit in the CCAPMn SFR are set then an interrupt will be generated

(see Figure 10).

Figure 10. PCA Capture Mode

16-bit Software Timer/

Compare Mode

The PCA modules can be used as software timers by setting both the ECOM and MAT

bits in the modules CCAPMn register. The PCA timer will be compared to the module's

capture registers and when a match occurs an interrupt will occur if the CCFn (CCON

SFR) and the ECCFn (CCAPMn SFR) bits for the module are both set (see Figure 11).

CCON

0xD8

CCAPnH

CCAPnL

CCF4 CCF3 CCF2

CCF1 CCF0

PCA IT

PCA Counter/Timer

ECOMn

CCAPMn, n= 0 to 4

0xDA to 0xDE

CAPNn MATn TOGn PWMn ECCFn

CAPPn

Cex.n

Capture

AT80C51RB2-SLSIM Datasheet(PDF) 30 Page - ATMEL Corporation