MPC8560CPXAPDB datasheet(100/108 Pages) FREESCALE

No. de pieza	MPC8560CPXAPDB

Descripción Electrónicos	Integrated Processor Hardware Specifications

PDF	108 Pages

Scroll/Zoom	100%

Fabricante Electrónico	FREESCALE [Freescale Semiconductor, Inc]

Página de inicio	http://www.freescale.com

Logo

100 / 108 page

MPC8560 Integrated Processor Hardware Specifications, Rev. 3.1

100

Freescale Semiconductor

System Design Information

The COP header shown in Figure 60 adds many benefits—breakpoints, watchpoints, register and memory

examination/modification, and other standard debugger features are possible through this interface—and can be as

inexpensive as an unpopulated footprint for a header to be added when needed.

The COP interface has a standard header for connection to the target system, based on the 0.025" square-post, 0.100"

centered header assembly (often called a Berg header).

There is no standardized way to number the COP header shown in Figure 60; consequently, many different pin

numbers have been observed from emulator vendors. Some are numbered top-to-bottom then left-to-right, while

others use left-to-right then top-to-bottom, while still others number the pins counter clockwise from pin 1 (as with

an IC). Regardless of the numbering, the signal placement recommended in Figure 60 is common to all known

emulators.

MPC8560CPXAPDB Datasheet(PDF) 100 Page - Freescale Semiconductor, Inc