EFP01 datasheet(64/158 Pages) SILABS

No. de pieza	EFP01

Descripción Electrónicos	EFP01 Energy Friendly PMIC Family

PDF	158 Pages

Scroll/Zoom	100%

Fabricante Electrónico	SILABS [Silicon Laboratories]

Página de inicio	http://www.silabs.com

Logo

64 / 158 page

5.1.3.7 EFP0109 / EFP0110

Note: EFP0109 & EFP0110 are nearly identical devices, differing primarily in the VOB configuration at and after startup:

• On EFP0109, the VOB converter output is enabled to 1.858V at startup and may be programmed after startup in the range 0.8V to

3.3V

• On EFP0110, the VOB converter output is disabled by default, and may be programmed after startup to an output in the range 0.8V

to 1.26V

Unless stated otherwise, all parameters in the EFP0109 & EFP0110 electrical specifications tables are specified under the following

conditions:

• VDDB = VBOOST = 3.0 V

• VDDA = GND

• VOA = 3.3 V

• VOB = 1.2 V (EFP0110) / 1.8 V (EFP0109)

• VOC = 1.8 V

• VIO = 1.8 V

• BB_IPK = 12, BB_IPK_NOADJ = 0, BB_IRI_CON = 0, BB_IPK_BOOST = 27

Note: VBOOST is the voltage applied to the inductor attached to the LA2 pin in Boost modes

EFP01 Energy Friendly PMIC Family Data Sheet

Electrical Specifications

silabs.com | Building a more connected world.

Rev. 1.3 | 64

EFP01 Datasheet(PDF) 64 Page - Silicon Laboratories