DANUBE

http://www.danube.com.tw

2013/9/6

23

INPUT FUSE SELECTION GUIDE

4.5-6.0V or 4.5-9V

INPUT VOLTAGE(VDC)

9-18V or 9-36V

INPUT VOLTAGE(VDC)

18-36V or 18-72V

INPUT VOLTAGE(VDC)

36-72V

INPUT VOLTAGE(VDC)

3000mA Slow-Blow Type

1500mA Slow-Blow Type

800mA Slow-Blow Type

400mA Slow-Blow Type

DC-DC

CONVERTER

+Vin

-Vin

+Vout

-Vout

OUTPUT

Fuse

INPUT

Note: Certain applications may require the installation of external fuse in front of the input.

CW SERIES APPLICATION NOTES:

EXTERNAL CAPACITANCE REQUIREMENTS:

No external capacitance is required for operation of the CW series.

To meet the reflected ripple requirements of the converter, an input impedance of less than 0.5 ohm

from DC to 100KHz is required.

External output capacitance is not required for operation, however it is recommended that 10uF

tantalum and 0.1uF ceramic capacitance be selected for reduced system noise.

Additional output capacitance may be added for increased filtering, but should not exceed 1000uF.

We Can Offer EMC-Filter According To EN55011/22 Class B.

Negative Outputs:

A negative output voltage may be obtained by connecting the +OUT to circuit ground and

connecting –OUT as the negative output.

FOR MORE INFORMATION CALL:

Danube Enterprise Co., Ltd.

Tel: 886-7-3755165

Fax: 886-7-3755330

E-mail: danube@ms10.hinet.net

Home Page

http://www.danube.com.tw