10

Absolute Maximum Ratings

Notes for Table 5:

1. Bridgelux recommends a maximum duty cycle of 10% and pulse width of 10 ms when operating LED SMD at maximum peak pulsed current

specified. Maximum peak pulsed currents indicate values where LED SMD can be driven without catastrophic failures.

2. Light emitting diodes are not designed to be driven in reverse voltage and will not produce light under this condition. Maximum rating provided for

reference only.

Parameter

Maximum Rating

LED Junction Temperature (T

j)

125°C

Storage Temperature

-40°C to +100°C

Operating Solder Point Temperature (T

Sp)

-40°C to +100°C

Soldering Temperature

260°C or lower for a maximum of 10 seconds

Maximum Drive Current

240mA

Maximum Peak Pulsed Forward Current1

480mA

Maximum Reverse Voltage2

-10V

Moisture Sensitivity Rating

MSL 3

Electrostatic Discharge

2kV HBM. JEDEC-JS-001-HBM and JEDEC-JS-001-2012

Table 5: Maximum Ratings